Tips for Managing Garage Epoxy Floor Applications, by VERSATILE PRODUCTS. 

APPLICATION TIP #7

Taping and Masking off Areas for Clean Lines by VERSATILE PRODUCTS
 
Taping and masking is often neglected when it comes to prep work, but it could be the difference between a mediocre and spectacular epoxy floor. Contractors have different taping methods that work well for them. Here are some basic tips and tricks that we use at Versatile Building Products to help during and after the epoxy flooring install process.

Mask the area with paint tape
Paint tape (such as 3M blue tape) is a great way to start. We tape the walls so that the edge is 1/8 above the concrete floor to ensure that the concrete is fully coated. Make sure the blue tape is firmly pressed onto the area to ensure correct adhesion so no epoxy can seep or bleed underneath. The blue tape also protects the walls from excess paint splatter.

Overlap the area with Grout Tape
The grout tape is applied over the blue tape to serve one main purpose: clean lines. Grout tape is more resilient to tearing compared to paint tape.

Know when to peel
We usually allow the coating to gel prior to removing the tape. This allows the grout tape to cut sharp lines before the coating is completely cured. If you wait too long to pull the tape off, the coatings will have dried and hardened, therefore making it incredibly difficult to remove.

Take caution for rough surfaces
Rough surfaces (such as house bricks and cinder-blocks) can be problematic as the tape cannot cover every pore and crevice. It is best to carefully use a brush when working around rough surfaces.